TYPES 1 and 23 Thread Cutting
Screws
TIGHTENING TORQUES
The tightening torques for metal applications
are dependant on many factors such as hole
size, material thickness,finish, etc. For many
applications a tightening torque midway between
highest driving torque and lowest faliure torque
should be selected. This should not usually
exceed the MAXIMUM recommended tightening torques
as shown.
|
TYPE
25 Thread Cutting
Screws
TIGHTENING TORQUES
The tightening torques for plastic applications
are usually dependent upon the ultimate shear
strength of the material involved. For most
applications a tightening torque midway
between the highest driving torque and lowest
failure torque should be selected. This should
not usually exceed the MAXIMUM recommended
tightening torque shown. Thread-RIte is always
at your service with any questions, contact
us.
|
