|
The new
Bow-Tie Locking Cotter pin works like a Hairpin Cotter, but
locks itself on! Push or pull cotter leg into hole, Bow-Tie
snaps into a zero-tension locked position. It is easily released
by lifting loop and sliding off, but reduces the risk of being
accidentally knocked or vibrated off, as with Hairpin Cotters.
Made from MB Spring Wire with an attractive zinc plated finish.
Use in any hole location to ensure secure fastening.
 |
 |
 |
 |
|
To
install, push or pull Bow-Tie™ into hole. |
Bow-Tie™
snaps into a zero-tension locked position! |
You
can even flip the Bow-Tie™ over the end-it stays locked!
|
Pull
locking loop up and over to release. |
|
Bow
Ties - Zinc Plated |
|
Use
On
Shaft Size |
Dimensions
|
Minimum
Hole Dia. |
Weight/Lbs.
Per 100 Pcs. |
A
Wire Diameter
|
B
Overall Length
|
C
I.D. of Loop |
| 1/4 |
0.072 |
1-3/8 |
0.25 |
0.094 |
0.41
|
| 5/16 |
|
|
|
0.094 |
|
| 5/16 |
0.091 |
1-7/8 |
0.375 |
0.109 |
0.92
|
| 3/8 |
|
|
|
0.125 |
|
| 7/16 |
0.12 |
2-3/4 |
0.562 |
0.141 |
2.22
|
| 1/2 |
|
|
|
0.156 |
|
| 5/8 |
0.12 |
2-3/4 |
0.562 |
0.156 |
2.22
|
| 5/8 |
0.148 |
3-37/64 |
0.687 |
0.203 |
3.67
|
| 3/4 |
0.12 |
2-3/4 |
0.562 |
0.156 |
2.22
|
| 3/4 |
0.148 |
3-37/64 |
0.687 |
0.203 |
4.14
|
| 1 |
0.177 |
4-37/64 |
0.875 |
0.218 |
6.69
|
|
|
