The POP NUT Softset nut is designed for installation into soft plastics such as PP and ABS. The unique design minimizes stress on the plastic and maximizes the backside flange diameter for exceptional pull out strength.
Add letters above to part number for type.
Nominal Thread Size M
Hole Size A (mm)
NUT NO.
Recommended Grip Range (mm)
L
(mm)
D
(mm)
H
(mm)
P
(mm)
Torque
(N-m)
Thread-Sheer
(kN)
M4 x 0.7
6.6
450
2.5-4.0
13.0
6.5
9.5
0.8
4.4
7.4
M5 x 0.8
7.6
550
2.5-4.0
13.7
7.5
10.5
1.0
10.8
10.8
M6 x 1.0
9.7
650
2.5-4.5
16.0
9.6
12.7
1.5
16.7
17.7
The above data will vary depending on the conditions (material, prepared hole diameter and thickness) of the base material.
Should you require a custom specification not listed plase contact Thread-rite
POP NUT Slit Nut
This POP NUT is designed to be installed in thin sheet metal and plastic. It's slotted body expands into 4 legs against the backside of the parent material providing excellent pull out resistance.
The Slit Nut requires additional tool stroke for proper installation. Use the PNT 800 SLIT tool for proper Slit Nut Installation.
Add letters to part number for type.
Nominal Thread Size M
Hole Size A (mm)
NUT NO.
Recommended Grip Range (mm)
L
(mm)
D
(mm)
H
(mm)
P
(mm)
Torque
(N-m)
Thread-Sheer
(kN)
19.5
15.5
1.5
16.7
17.6
M6 x 1.0
9.9
640
0.5-4.0
9.8
670
3.5-7.0
22.5
POP NUT Tube Nut
The Tube Nut is designed to be installed into round tubes. The underside of the head is arched to conform to the curved surface of a tube. Therefore, once installed the nut provides a horzontal bearing surfaceand provides excellent spin out resistance.
The Tube Nut is designed to be installed into round tubes. The underside of the head is arched to conform to the curved surface of a tube. Therefore, once installed the nut provides a horzontal bearing surfaceand provides excellent spin out resistance.
