Open-end
POP rivets, when set, resemble conventional tubular rivets. However unlike
tubular rivets, the mandrel head is retained within the body of the Open-End
POP Rivet. Providing strong, low cost fastenings, open-end rivets are
ideal for a wide variety of applications. They are available in a wide
variety of materials and combinations with dome, countersunk, or large-flange
head styles. A universally accepted range of rivets suitable for most
industrial riveting applications where the materials to be fastened do
not have high load bearing requirements.
|
 |
| 5052
Aluminum Body / Aluminum Mandrel - Domed Head - Finish: Plain / Plain |
 |
The 'POP®' Open
type blind rivet is a hollow rivet pre-assembled on to a headed pin
or mandrel. Rivet bodies are available in a range of materials for
complete workpiece compatibility. The rivets are available in pure
aluminum, aluminum 2.5%, 3.5% and 5.0% magnesium alloy, copper, mild
steel, nickel-copper alloy, and stainless steel and are normally supplied
with Break Stem mandrels which promote retention of the head of the
mandrel in the set rivet body.
General
Features
- Wide range of
diameters
- Range of lengths
suitable for material thicknesses up to 26mm
- Countersunk (120º)
heads available
- Break head mandrels
available in most sizes
- Large-flange
rivets, giving wide load spread, available in aluminum alloy and
nickel-copper
- Nickel-copper
rivets particularly suitable for marine and other corrosive atmospheres.
|
|
open end rivets 2
|
|
|
