 |
HO
- Axial Retaining Rings
Internal Inch- Once installed in the groove of a housing/bore,
the portion of the ring protruding from the groove (also called
a "shoulder") holds an assembly in place.
Size Ranges: HO--.250-10.0
Inches; DHO-8.0mm-400mm; DHR-20mm-100mm; MHO--8.0mm-250mm.
1/4"-1 11/16",- 1 3/4"-3 1/2",3 9/16"-10"
|
 |
SH- Axial Retaining Rings
External Inch- Once installed in the groove of a shaft,
the portion of the ring protruding from the groove (also called
a "shoulder") holds an assembly in place.
Size Ranges: SH--.125-10.0 Inches; DSH-3.0mm-400mm;
MSH--.4mm-100mm.
1/8"-1 1/8", 1 3/16"-3 1/2", 3 9/16"-10"
|
 |
HOI - Axial Retaining Rings
Internal Inverted Inch- Functions like an HO ring
in a housing/bore, only the lugs are "reversed." This version
reduces the distance the lugs of the standard HO extend into
the inner circumference of the housing/bore and allows for
another assembly to pass through unimpeded.
Size Range: HOI--.625-4 Inches; DHI-12mm-100mm.
|
 |
SHI - Axial Retaining Rings
External Inverted Inch- Functions like an SH ring
on a shaft, only the lugs are "reversed." This version reduces
the distance the lugs of the standard SH extend beyond the
circumference of the shaft. The shaft can then be used in an
application where clearance is minimal.
Size Range: SHI--.500-3.98 Inches; DSI-12mm-100mm.
|
 |
SHR - Axial Retaining Rings
External Reinforced Inch- An extra thick version of
a regular SH retaining ring. As such, it is stronger and can
withstand greater thrust loads than its standard counterpart.
Size Range: SHR--.394-2.0 Inches;
DSR-12mm-100mm, MSR-10mm-50mm.
|
 |
SHM - Axial Retaining Rings
External Miniature Inch- This ring does not have any
lugs making it tamper proof once installed.
Size Range: .101-.375 Inches.
|
 |
BHO - Axial Retaining Rings
Internal Bowed Inch- Compensating for accumulated
tolerances is what a BHO retaining ring is designed to do in
a housing/bore. Once snapped into the groove, bowed rings exert
a force or a "preload" on the retained parts for the range
specified in the catalog.
Size Range: BHO-.250-1.750 Inches.
|
 |
BSH - Axial Retaining Rings
External Bowed Inch- Compensating for accumulated
tolerances is what a BSH "Bowed" retaining ring is designed to do on a
shaft. Once snapped into the groove, bowed rings exert a force
or a "preload" on the retained parts for the range specified
in the catalog.
Size Range; BSH--.250-1.750 Inches.
|
 |
VHO - Axial Retaining Rings
Internal Beveled Inch- These rings look exactly
like their HO counterpart, only they have a 15° angle on the
outer edge. This combines with a complementary groove angle
to eliminate end play by wedging itself between the groove
and the retained part.
Size Range: VHO-1.0-10.0 Inches.
|
 |
VSH - Axial Retaining Rings
External Beveled Inch- These rings look exactly like
their SH counterpart, only they have a 15° angle on the inner
edge. This combines with a complementary groove angle to eliminate
end play by wedging itself between the groove and the retained
part.
Size Range: VSH-1.0-10.0 Inches.
|
